Skip to main contentSkip to footer

IPR Safety Stock Models in IFS Cloud: How Each One Works

How IFS Cloud IPR calculates safety stock: demand models, safety stock models, the cover time limit and a worked example from the documentation.

Independent IFS Cloud practice · Inventory planning design Choose a safety stock model you can explain to the buyer IFS Cloud IPR safety stock is the inventory kept on stock as a buffer to achieve the wanted service level, and the model that calculates it decides how the buffer follows demand. If the model is chosen…

Read more

Handling Units and Packing Instructions in IFS Cloud

How handling units and packing instructions work in IFS Cloud: structure levels, packing from the bottom up, SSCC and labels, and what to set up first.

Independent IFS Cloud practice · Shipping and packing design Design the packing instruction once, so every pallet is described the same way A handling unit in IFS Cloud is a collective name for all types of containers in which parts can be packed, and a handling unit structure describes the packing as done in one or…

Read more

Part Status in IFS Cloud: Onhand, Demand and Supply Flags

What the part status flags do in IFS Cloud: whether a part can hold stock, take demand or be supplied, the default status and the rules for changes.

Independent IFS Cloud practice · Master data design Design the part status set before parts are linked to it An IFS Cloud part status is a master data record that describes the different phases of a part and controls the extent to which the system can use the part. Its parameters cannot be modified once the record is…

Read more

Reservation Rules in IFS Cloud: Which Stock Goes First

How IFS Cloud decides which stock to reserve first: the reservation rules, their order, shipment-assigned quantities, and manual overrides.

Independent IFS Cloud practice · Reservation design Set the reservation rule order to match the stock the warehouse wants to ship first IFS Cloud reservation rules decide which stock record is reserved when several records could cover the same order line. The IFS page on reservation management lists five priority…

Read more

IFS Cloud Ship Goods and Assets: What It Creates

IFS Cloud Ship Goods and Assets creates a shipment order in one company and distribution and internal orders between companies. Limits and set-up.

Independent IFS Cloud practice · Inventory transfer design Know which documents the system creates before you start the move The IFS Cloud Ship Goods and Assets activity starts one move, and the system creates different documents depending on who receives the goods. If the set-up behind each route is not known, a move…

Read more

IFS Cloud Part Availability Control: What Each Setting Does

IFS Cloud part availability control settings: nettable, reservation, issue, movement, scrap, counting and refill, and where the default is set.

Independent IFS Cloud practice · Inventory settings design Know which function reads which parameter before you change an availability control An IFS Cloud part availability control is a small record whose parameters act on different functions at once: planning, reservation, issue, movement, scrapping, counting and…

Read more

IFS Cloud Remote Warehouse: Defaults, Refill, Arrival

IFS Cloud remote warehouse set-up: default availability controls, refill and arrival defaults, and what to decide before stock moves out.

Independent IFS Cloud practice · Warehouse set-up design Decide what remote stock may do before the first part moves out An IFS Cloud remote warehouse holds stock away from the main warehouse, for example at a supplier or in a service van, and it is still stock. If its availability, movement and refill settings stay…

Read more

IFS Cloud Kits and Kit Assembly Orders: How They Work

IFS Cloud kit assembly orders build and change kit serials. Master part rules, kit definition, statuses and what MRP does not plan.

Independent IFS Cloud practice · Inventory design Set up the kit master part correctly, and know what planning leaves to you An IFS Cloud kit assembly order builds or changes a kit serial, which is one stocked unit made of components. Inventory, assembly and planning all touch the kit. If the master part is set up…

Read more

IFS Cloud Warehouse Tasks: Priority and Planning

IFS Cloud warehouse tasks are prioritised by default and operative priority, and planned through workers, groups and a workload view. How to set it up.

Independent IFS Cloud practice · Warehouse planning design Decide which task a worker gets first, before the set-up decides it for you IFS Cloud warehouse tasks are the units of work through which the floor receives picking and transport work when warehousing is used. If task types, workers and priorities are not…

Read more
Abstract illustration on a navy background with the article title: IFS Cloud Ship Goods and Assets: What It Creates

Independent IFS Cloud practice · Inventory transfer design

Know which documents the system creates before you start the move

The IFS Cloud Ship Goods and Assets activity starts one move, and the system creates different documents depending on who receives the goods. If the set-up behind each route is not known, a move fails for a missing default, or master data appears that nobody planned. The stock moves, and with it come documents, reservations and master data the business did not expect. This article follows the 26R1 page on shipping goods and assets and the 25R2 page on the shipment order.

Key takeaways

  • Depending on whether the receiver site is within the same company or a different company, a shipment order or a distribution order is used to administrate the move.
  • Within one company, a shipment order is created in either planned or released state, depending on the Create in Released Status option, and the selected parts or handling units are reserved against its lines.
  • Between companies, distribution orders are created per part and released, and one internal customer order and one internal purchase order are created and released.
  • Missing sales parts at the sender site and missing purchase parts at the receiving site are created automatically, including the supplier for the purchase part.
  • The inter-company scenario is not available for project inventory, configured parts or ownerships other than Company Owned, and the shipment order does not support goods movement between companies.
  • The two-route table sets out the condition, the documents created and the stated limits for each route.

1.What does the activity do, and how does it choose the route?

The activity initiates the move of an inventory part, a non inventory part, no part or a handling unit between a site and/or a remote warehouse, and it chooses the document by the company of the receiver. The page states that, depending on if the receiver site is within the same company or a different company, a shipment order or distribution order will be used to administrate the move.

The page positions the activity for goods that need transport outside the warehouse. A transport task is better suited to stock movement within the warehouse, as covered in warehouse tasks in IFS Cloud. The comparison of the shipment order and the distribution order as tools is in shipment order in IFS Cloud and distribution orders in IFS Cloud, and this article does not repeat it.

Receiver Documents created Stated limits
Site in the same company A shipment order, in planned or released state depending on the Create in Released Status option; selected parts or handling units reserved against its lines The shipment order does not handle consignment stock or supplier-owned parts
Site in a different company Distribution orders per part, released; one internal customer order and one internal purchase order, released; parts reserved to the corresponding customer order lines Not available for project inventory, configured parts or ownerships other than Company Owned

2.What happens inside one company?

Inside one company a new shipment order is created in either planned or released state, depending on the Create in Released Status option, and the selected parts or handling units are reserved against the shipment order lines. The page also says it is possible to add more parts and quantity to an existing shipment order with the same sender and receiver.

The quantity is consolidated into the shipment order line based on part, condition code, configuration ID, ownership, owner, demand code and reference, and project activity. The page’s example: if moving ten serials, it will be one shipment order line with the quantity 10 PCS. The ownership key links the move to part ownership in IFS Cloud, and the shipment documents to consolidated shipment in IFS Cloud.

Prerequisites sit on both the data and the stock. To ship using a shipment order (intra company), the page says the following basic data should be set up as shipment order default values: Requisitioner, Ship Via, Delivery Terms and Shipment Types. For stock, the available quantity of the part should be greater than zero, and for a handling unit the entire quantities of the parts must be available. A part received into an arrival or quality assurance location can be shipped too, with the purchase order receipt added as demand code and reference on the shipment order line, but from these locations it is only possible to move goods to a receiver in the same site.

3.What happens between companies?

Between companies the activity works through distribution orders and internal orders. Distribution orders will be created per part and released. One internal customer order and one internal purchase order will be created and released, and the parts will be reserved to the corresponding customer order lines.

The prerequisites differ from the intra-company route. The page states that an internal customer and supplier need to be configured and connected to the respective site, and that if a sales part or the supplier for a purchase part is missing, the inventory part must have a Unit Cost. The price set is fetched from the inventory part cost. The decision about who maintains the internal customer and supplier records is a master data decision, not a warehouse one. The sites involved are covered in site cluster functionality.

4.What does the system create automatically?

If sales parts are missing in the sender site and/or purchase parts are missing in the receiving site, they will be created automatically, including the supplier for the purchase part. These are master data records that the business did not enter itself.

Treat this as a decision and not as a convenience. Decide who approves the automatically created parts, how they are named and whether the unit cost on the inventory part is the cost the receiving company should see.

5.What are the limits?

The inter company scenario is not available for project inventory, configured parts or ownerships other than Company Owned. The shipment order page adds that the shipment order doesn’t support goods movement between companies, and that for now it doesn’t handle consignment stock or supplier owned parts.

A distribution order and inter-site order concept cannot handle goods movement when remote warehouses are involved, according to the shipment order page. The remote warehouse side is covered in the IFS Cloud remote warehouse article. Stock that falls under one of the stated limits needs another route, which has to be agreed before the first move.

6.Which decisions belong to inventory, finance and master data owners?

Inventory owns the shipment order defaults and the Create in Released Status option for the intra-company route. Master data owners own the internal customer and supplier, the sales parts and purchase parts, and the unit costs. Finance owns the intercompany treatment of the documents that the inter-company route creates, and decides how the price from the inventory part cost is handled between the companies.

7.How do you test both routes before go-live?

Test each route with one move and write down the documents you expect before it runs.

Move Expected documents Owner
Within one company, defaults set A shipment order in the state set by the Create in Released Status option; stock reserved against its lines Inventory lead
Within one company, a default missing Record what the activity does when Requisitioner, Ship Via, Delivery Terms or Shipment Types is not set up Inventory lead
Between companies, parts exist Distribution orders per part, one internal customer order and one internal purchase order, all released; stock reserved to the customer order lines Inventory lead and finance
Between companies, parts missing Sales parts and purchase parts created automatically, including the supplier Master data owner
Between companies, stock under a limit Project inventory, configured part or non-company ownership: the scenario is not available Inventory lead

8.What does a transfer set-up checklist contain?

The transfer set-up is ready for go-live when each of the checks below has a record behind it.

  1. The shipment order defaults Requisitioner, Ship Via, Delivery Terms and Shipment Types are set up.
  2. The Create in Released Status option is decided.
  3. The internal customer and supplier are configured and connected to the respective sites.
  4. The unit cost is set on inventory parts where sales parts or purchase parts may be created automatically.
  5. Someone approves automatically created master data.
  6. Stock that falls under the inter-company limits has an agreed alternative route.
  7. The five test moves are recorded with evidence.

9.Frequently asked questions

What does the Ship Goods and Assets activity do in IFS Cloud?

The Ship Goods and Assets activity in IFS Cloud initiates the move of an inventory part, a non inventory part, no part or a handling unit between a site and/or a remote warehouse. Depending on whether the receiver site is within the same company or a different company, a shipment order or a distribution order is used to administrate the move.

Which document is created for a move within one company?

A shipment order is created, in either planned or released state depending on the Create in Released Status option. The selected parts or handling units are reserved against the shipment order lines. The shipment order defaults Requisitioner, Ship Via, Delivery Terms and Shipment Types should be set up first.

Which documents are created for a move between companies?

Distribution orders are created per part and released. One internal customer order and one internal purchase order are created and released, and the parts are reserved to the corresponding customer order lines. An internal customer and supplier need to be configured and connected to the respective site.

Can the inter-company route move stock that is not company owned?

No. The IFS Cloud documentation states that the inter company scenario is not available for project inventory, configured parts or ownerships other than Company Owned. The shipment order also does not support goods movement between companies.

What happens when sales parts or purchase parts are missing for an inter-company move?

If sales parts are missing in the sender site and/or purchase parts are missing in the receiving site, IFS Cloud creates them automatically, including the supplier for the purchase part. When a sales part or the supplier for a purchase part is missing, the inventory part must have a Unit Cost.

10.About the author

Dariusz Myśliwiec: 18 years hands-on with IFS, including IFS Cloud. Based in Kraków, delivering remotely across Europe and globally through an independent practice. You talk to the consultant who does the work, not a sales layer.

IFS is a registered trademark of IFS AB; this practice is not affiliated with IFS AB.

Do transfers between your companies create things you did not set up?

A review of the transfer set-up for both routes, with test moves, shows which defaults and master data each route needs. Inventory, finance and master data owners take part.

Book a transfer set-up review Read about remote warehouses

×
Need Expert Guidance?
We've helped hundreds of businesses succeed. Get a free consultation to discuss your project requirements.
Get Free Consultation
17Years Experience
50Implementations
PRINCE2Certified
100%Success Rate

ROI Calculator

Calculate your return on investment

Input Values

€
€
€

Results

Annual Savings
€ 0
Payback Period
0 months
ROI
0%
Monthly Savings
€ 0

Get Detailed Report

Enter your details to receive a detailed ROI report.